Profoto D4 User Manual download pdf (Page 21)

Profoto D4 – Profoto Studio Software

D4D4

Profoto D4 – Profoto Studio Software

Profoto 36 The Light Shaping Company The Light Shaping Company

37 Profoto

Individual Control

5. To use the auxiliary functions and/or set the radio slave channel, click the AUXILIARY

tab. Now you can set all functions – see page 26-29 for details about the auxiliary

functions.

6. To save all settings of this generator, click the tap SAVE in the field STORE OPERATIONS.

Now it is possible to recall this set-up by clicking the given name in the left field STORE

first and the button RECALL in the field STORE OPERATIONS next, even if the genera

tor was deactivated or disconnected. The number of saved set-ups is just limited by the

computer memory available. It is also possible to check set-ups saved earlier – if you

want to return to the previous settings, simply click UNDO in the STORE SELECTION

field. If you want to delete a saved set-up, mark the name of this set-up in the field

STORE and click DELETE in the field STORE SELECTION.

Control all generators

This function can be used to increase or decrease the power of the whole set-up for bracketing

use, to adjust the output to another film speed or if you want to change the aperture.

1. Click the ALL tab to get access to control the functions of all generators connected.

Each D4 generator connected is additionally listed with a separate tab.

1. Click the INDIVIDUAL tab to get access to the control functions of a single generator.

Each D4 generator connected is listed with a separate tab.

2. Click on the tab of the generator you want to control. The generators are listed with their

identity number; but it is possible to give each generator an individual description in the

field NAME, and save the new description by pressing the return/enter key of the computer.

3. Click the FLASH POWER tab to get access to the power, modelling light, ready signals

and recycling mode controls of the corresponding generator. Each lamp head

connected can be controlled separately via the A, B, C and D fields. The ON sign in

the control fields without a lamp head connected remains grey, the ones with a

connected lamp head show a black ON sign.

4. Adjust the power level of each lamp head in 1/1 or 1/10 f-stops by clicking the

corresponding + and – buttons. Additionally the power of each lamp head is shown in

Ws. If the desired power distribution is impossible, you have to reduce the power of

another head. You will hear a warning signal and the energy level necessary is displayed

in red letters for about 5 seconds above the corresponding control field. If you don’t

re-adjust the generator, it will work with the previous settings. See page 23-24 for

details about the energy distribution. In the upper part of the power control field you

can select a name or add an individual description for the respective head, and save

the new description by pressing the return/enter key of the computer. If you want to

adjust the power level of all heads connected to this generator, use the + and – buttons

in the field MASTER.

1 2 ... 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Profoto D4 User Manual Page 21

Comments to this Manuals

Related products and manuals for Power generators Profoto D4